Tested & Certified.
Benefits to you are:- You can be confident that our products will be compliant with all relevant standards
- You can be sure that the testing has been carried out correctly on all components
- You can be sure that the systems are in place to maintain the same high standards, week in, week out
- You can be sure that AFFORDABLE SOLAR ENERGY are committed to the very highest of standards in all of their products and installation procedures
The Highest International Standards
Performance Test - DIN 4757-T3:
REQUIRED TESTS:
- Inside pressure test of absorber
- Sustainability of high temperature
- Exposure to solar radiation
- Fast change of outer temperature
- Fast change of inner temperature
- Penetration of rainwater
- Mechanical stress
- Output of warmth
Quality Test - DIN 4757-T4:
WITHIN TEST REPORT
- KTB 2000-02, point 7.1
- KTB 99017, point 7.5
- KTB 99017, points 7.1-7.4
- KTB 99017, point 7.6
- KTB 99017, point 7.7
- KTB 99017, point 7.8
- KTB 99017, point 6
What this means to you
BSI / ISO / DIN certification levels mean:
- The components are regularly tested
- The testing is always independent
- ISO / BSI / DIN regularly assess the quality system of the factory site
- Considerable time and effort has been devoted by AFFORDABLE SOLAR ENERGY to achieve and maintain these high standards
Affordable Solar Energy is ELECSA Part P registered.
ELECSA provides inspection, assessment and certification services to contractors working with electrical installations in private dwellings. It was authorised by the Department for Communities and Local Government (formerly the ODPM) to deliver a competent persons scheme to enable contractors to self certify domestic electrical work under Part P of the building regulations. In short, electrical installations must be safe!
Part P applies to fixed electrical installations in dwellings (including gardens and shared amenities in blocks of flats) and affects many of the typical jobs undertaken by electrical contractors, particularly work carried out in kitchens and bathrooms.
Part P Competent Person Schemes like ELECSA permits firms to self-certify that their work complies with all applicable requirements of the Building Regulations. Self-certification benefits the householder because by using a Competent Person they don’t have to pay building control fees or submit a building notice. In addition, householders have the important reassurance that by using a Competent Person, they are using a firm that has been independently assessed and certified as competent to carry out the work.
Click here for further information